Power Beam 3000

Combining 16 high-powered LEDs in a fully sealed die cast housing, Power Beam 3000 provides 3100 Lumens output for close and long range illumination.

Brand: Hella
Type: LED
Use: Work Light

Swipe for more image views

As an addition to the HELLA LED work lamp range, the Power Beam 3000 has been developed as a compact high-powered illuminating source. By combining 16 high-powered LEDs into a compact fully sealed die cast housing, the Power Beam 3000 achieves an outstanding 3100 Lumen output to provide close range illumination where physical constraints on mining machinery exist.

A rated operating temperature from -40 to +50°C, an expected lifespan of over 130 times that of a halogen bulb, plus excellent ingress protection means the Power Beam 3000 is suitable for the most unforgiving mining environments.
With a low power consumption of 43 Watts, the lamp places minimal strain on the vehicle’s electrical system, while the quality electronics provide Multivolt™ operation over a range of voltage levels from 9 to 33V DC.

The Power Beam 3000 also features reverse polarity protection, and overheating protection, which turns the light off when the integrated thermal sensor is triggered. The Power Beam 3000 comes pre-wired with a 150mm high temperature resistant pigtail loom with pre-connected 2 pin DT plug, allowing quick and easy installation. The low EMC signature (class 5) ensures the lamp does not interfere with any critical safety equipment such as radios.

The dimming function reduces light output to around 50% and can be controlled by the activation of a second active wire via a switch or other means. This allows the AS 5000LED® to operate on reduced power mode below 10.2V to prevent battery drain on mobile equipment when lights are on but the engine is not running.

Product Features:

  • 16 high power LEDs
  • Light output (measured): 3100 Lumens
  • Colour temperature 5700°K
  • PMMA Lens
  • Multivolt™ 9-33 V DC
  • Power consumption: 43W
  • Low EMC Signature (CISPR25 class 5)
  • Environment temp -40 to +50°C
  • Die cast aluminium housing
  • Stainless steel bracket
  • Ingress Protection IP6K7 and IP6K9K
  • Lifespan up to 130 times that of a halogen bulb
  • 200G shock tested
  • Pigtail loom with high temp silicone cable and 2 pin DT
  • Reverse polarity protected
  • LED fail bridge
  • High-temperature protection

Swipe for more image views

As an addition to the HELLA LED work lamp range, the Power Beam 3000 has been developed as a compact high-powered illuminating source. By combining 16 high-powered LEDs into a compact fully sealed die cast housing, the Power Beam 3000 achieves an outstanding 3100 Lumen output to provide close range illumination where physical constraints on mining machinery exist.

A rated operating temperature from -40 to +50°C, an expected lifespan of over 130 times that of a halogen bulb, plus excellent ingress protection means the Power Beam 3000 is suitable for the most unforgiving mining environments.
With a low power consumption of 43 Watts, the lamp places minimal strain on the vehicle’s electrical system, while the quality electronics provide Multivolt™ operation over a range of voltage levels from 9 to 33V DC.

The Power Beam 3000 also features reverse polarity protection, and overheating protection, which turns the light off when the integrated thermal sensor is triggered. The Power Beam 3000 comes pre-wired with a 150mm high temperature resistant pigtail loom with pre-connected 2 pin DT plug, allowing quick and easy installation. The low EMC signature (class 5) ensures the lamp does not interfere with any critical safety equipment such as radios.

The dimming function reduces light output to around 50% and can be controlled by the activation of a second active wire via a switch or other means. This allows the AS 5000LED® to operate on reduced power mode below 10.2V to prevent battery drain on mobile equipment when lights are on but the engine is not running.

Product Features:

  • 16 high power LEDs
  • Light output (measured): 3100 Lumens
  • Colour temperature 5700°K
  • PMMA Lens
  • Multivolt™ 9-33 V DC
  • Power consumption: 43W
  • Low EMC Signature (CISPR25 class 5)
  • Environment temp -40 to +50°C
  • Die cast aluminium housing
  • Stainless steel bracket
  • Ingress Protection IP6K7 and IP6K9K
  • Lifespan up to 130 times that of a halogen bulb
  • 200G shock tested
  • Pigtail loom with high temp silicone cable and 2 pin DT
  • Reverse polarity protected
  • LED fail bridge
  • High-temperature protection
Power Beam 3000# Order Code
Close RangeHMPB300WB
Long RangeHMPB300NB

Order this light today!

Place an order on: +44(0) 7768 517 012 or
+44(0) 1535 602 946 quoting the correct # Order Code or send us an email with your questions.

Order this light today!

Place an order on:
+44(0) 7768 517 012 or
+44(0) 1535 602 946
quoting the correct # Order Code or send us an email with your questions.