OptiRAY® E
HELLA OptiRAY® E LED warning beacons are designed for heavy duty use on mining equipment and service vehicles where complex functionality is not required.
Brand: Hella
Type: LED
Use: Warning Beacon
Swipe for more image views
OptiRAY® E beacons are engineered to the same high standard as the full-featured OptiRAY® products, but including only the essential features enables the benefits of LED products to be extended into a significantly wider range of applications.
OptiRAY® E beacons are extremely robust, tolerant to severe vibration levels and very compact in design. Each beacon is equipped with a high impact and shock resistant, clear polycarbonate lens and a rugged, UV damage resistant fibreglass nylon composite base for increased mechanical strength and maximum durability. A neoprene O-ring seals the assembly against dust and water. The OptiRAY® E is well suited to corrosive environments where metal products should not be used.
Unlike Xenon flash strobes, OptiRAY® E LED beacons are maintenance-free and extremely power efficient. Each beacon draws a maximum of only 1 AMP at 12V, which greatly reduces both operating temperature and demand on the vehicle’s electrical system. Maximum service life and light output of the high intensity LEDs is ensured through using internal aluminum heat sinks. The Multivolt™ control module also protects the OptiRAY® E against damage from overheating, reverse polarity and short circuits. (See technical section for more Multivolt™ information.)
Safe and reliable electrical connection is facilitated via a highly flexible double insulated cable sealed into the base, terminated as a short length with a DT connector or 2m cable with bare wire ends. Other connector options can be supplied as special orders.
OptiRAY® E beacons are available in five LED signal colors (amber, red, blue, green and white) to suit all signal applications. Installation is possible with either the standard direct mount or optional pipe mounting kit; temporary use applications are best served with the magnetic mount version, complete with a pre wired cable and power plug.
Product Features:
- SAE J845 (Class 1 Red, Class 8 Amber)
- Available in Amber, Red, Blue and Green
- Impact resistant smooth polycarbonate lens
- Clear precision Fresnel optics
- Direct, pipe mount or magnetic installation options
- Multivolt™ 12 – 30V DC
- Low current draw 1AMP
- Fully encapsulated electronics
- 0.5kg mass
- 200G shock impulse resistant
- Overheat, reverse polarity and short circuit protection
- Double insulated supply cable with DT or AMP plug
- O-rings seals
- Tested over a -20ºC to +50ºC temperature range
- High efficiency, long life LED light
- IP6K5 Rated
- 200G shock resistant
- Spares interchangeable with HELLA OptiRAY® range
- Double Flash, 80FPM
OptiRAY® E | # Order Code |
---|---|
Amber Direct Mount | HM300ADIR |
Amber Mag Mount | HM300AMAG |
Red Direct Mount | HM300RDIR |
Red Mag Mount | HM300RMAG |
Blue Direct Mount | HM300BDIR |
Blue Mag Mount | HM300BMAG |
Green Direct Mount | HM300GDIR |
Green Mag Mount | HM300GMAG |
White Direct Mount | HM300WDIR |
White Mag Mount | HM300WMAG |
Clear Lens | 9.HM360LENS |
Pipe Mount Kit | HM360PIPE |
Order this light today!
Place an order on: +44(0) 7768 517 012 or
+44(0) 1535 602 946 quoting the correct # Order Code or send us an email with your questions.
Swipe for more image views
OptiRAY® E beacons are engineered to the same high standard as the full-featured OptiRAY® products, but including only the essential features enables the benefits of LED products to be extended into a significantly wider range of applications.
OptiRAY® E beacons are extremely robust, tolerant to severe vibration levels and very compact in design. Each beacon is equipped with a high impact and shock resistant, clear polycarbonate lens and a rugged, UV damage resistant fibreglass nylon composite base for increased mechanical strength and maximum durability. A neoprene O-ring seals the assembly against dust and water. The OptiRAY® E is well suited to corrosive environments where metal products should not be used.
Unlike Xenon flash strobes, OptiRAY® E LED beacons are maintenance-free and extremely power efficient. Each beacon draws a maximum of only 1 AMP at 12V, which greatly reduces both operating temperature and demand on the vehicle’s electrical system. Maximum service life and light output of the high intensity LEDs is ensured through using internal aluminum heat sinks. The Multivolt™ control module also protects the OptiRAY® E against damage from overheating, reverse polarity and short circuits. (See technical section for more Multivolt™ information.)
Safe and reliable electrical connection is facilitated via a highly flexible double insulated cable sealed into the base, terminated as a short length with a DT connector or 2m cable with bare wire ends. Other connector options can be supplied as special orders.
OptiRAY® E beacons are available in five LED signal colors (amber, red, blue, green and white) to suit all signal applications. Installation is possible with either the standard direct mount or optional pipe mounting kit; temporary use applications are best served with the magnetic mount version, complete with a pre wired cable and power plug.
Product Features:
- SAE J845 (Class 1 Red, Class 8 Amber)
- Available in Amber, Red, Blue and Green
- Impact resistant smooth polycarbonate lens
- Clear precision Fresnel optics
- Direct, pipe mount or magnetic installation options
- Multivolt™ 12 – 30V DC
- Low current draw 1AMP
- Fully encapsulated electronics
- 0.5kg mass
- 200G shock impulse resistant
- Overheat, reverse polarity and short circuit protection
- Double insulated supply cable with DT or AMP plug
- O-rings seals
- Tested over a -20ºC to +50ºC temperature range
- High efficiency, long life LED light
- IP6K5 Rated
- 200G shock resistant
- Spares interchangeable with HELLA OptiRAY® range
- Double Flash, 80FPM
OptiRAY® E | # Order Code |
---|---|
Amber Direct Mount | HM300ADIR |
Amber Mag Mount | HM300AMAG |
Red Direct Mount | HM300RDIR |
Red Mag Mount | HM300RMAG |
Blue Direct Mount | HM300BDIR |
Blue Mag Mount | HM300BMAG |
Green Direct Mount | HM300GDIR |
Green Mag Mount | HM300GMAG |
White Direct Mount | HM300WDIR |
White Mag Mount | HM300WMAG |
Clear Lens | 9.HM360LENS |
Pipe Mount Kit | HM360PIPE |
Order this light today!
Place an order on:
+44(0) 7768 517 012 or
+44(0) 1535 602 946
quoting the correct # Order Code or send us an email with your questions.