MegaBeam LED

HELLA MegaBeam LED is a compact close range work lamp for use on special vehicles and mining machines where high vibration or extreme cold makes the use of conventional work lamps impractical.

Brand: Hella
Type: LED
Use: Work Lamp

Swipe for more image views

High intensity white LEDs provide low power illumination in an ultra reliable design.

Solid-state LED light sources enabled the design of a fit-and- forget, completely sealed and waterproof work lamp that needs no service. The very long service life of the MegaBeam LED, combined with no lighting loss due to internal dirt build-up, enables the work lamps to deliver reliable lighting under extremely tough operating conditions.

Low power consumption and Multivolt™ operation features pioneered by HELLA LED products are integral to the product design.

Brilliant Free-Form reflector optics, combined with a clear lens, optimize the light distribution of the high intensity white LEDs in the MegaBeam LED work lamp to provide homogenous large area illumination with maximum efficiency.

Product Features:

  • Yellow ring marks product as mining specific version
  • Electrical connection: 2m double insulated cable with bare wire ends or with optional short length wire with DT connector
  • Stainless steel mounting bracket
  • IP5K9K
  • Multivolt™ 12-24VDC
  • Die cast aluminium body
  • Multi stage anti-corrosion powder coat
  • Clear glass lens
  • High intensity LED light source array
  • Fully sealed “Fit and Forget” design
  • Voltage spike protected to +500VDC
  • Over voltage protected to +200VDC
  • Reverse polarity protected to -500VDC
  • Power consumption of only 7W
  • 200G shock impulse resistant
  • -40ºC to +50ºC temperature range
  • CE compliant

Maximum service life and light output of the high intensity LEDs is ensured through using the die cast aluminium body as a massive heat sink; its ergonomic oval shape creates an efficient and compact unit, easy to fit into confined spaces.

Fully encapsulated Multivolt™ drive circuitry delivers consistent illumination from 12-24V DC – even under severe voltage fluctuations and low battery voltage.
Comprehensive protection against reverse polarity, high-voltage spikes and over-voltage, ensures reliable operation.

Safe and reliable electrical connection is facilitated via a 2m length of highly flexible double insulated cable, terminated with either a DT connector or bare wire ends.

The supplied stainless steel mounting hardware is non-resonant and highly corrosion resistant.

Swipe for more image views

High intensity white LEDs provide low power illumination in an ultra reliable design.
Solid-state LED light sources enabled the design of a fit-and- forget, completely sealed and waterproof work lamp that needs no service. The very long service life of the MegaBeam LED, combined with no lighting loss due to internal dirt build-up, enables the work lamps to deliver reliable lighting under extremely tough operating conditions.

Low power consumption and Multivolt™ operation features pioneered by HELLA LED products are integral to the product design.

Brilliant Free-Form reflector optics, combined with a clear lens, optimize the light distribution of the high intensity white LEDs in the MegaBeam LED work lamp to provide homogenous large area illumination with maximum efficiency.

Maximum service life and light output of the high intensity LEDs is ensured through using the die cast aluminium body as a massive heat sink; its ergonomic oval shape creates an efficient and compact unit, easy to fit into confined spaces.

Fully encapsulated Multivolt™ drive circuitry delivers consistent illumination from 12-24V DC – even under severe voltage fluctuations and low battery voltage.
Comprehensive protection against reverse polarity, high-voltage spikes and over-voltage, ensures reliable operation.

Safe and reliable electrical connection is facilitated via a 2m length of highly flexible double insulated cable, terminated with either a DT connector or bare wire ends.

The supplied stainless steel mounting hardware is non-resonant and highly corrosion resistant.

Product Features:

  • Yellow ring marks product as mining specific version
  • Electrical connection: 2m double insulated cable with bare wire ends or with optional short length wire with DT connector
  • Stainless steel mounting bracket
  • IP5K9K
  • Multivolt™ 12-24VDC
  • Die cast aluminium body
  • Multi stage anti-corrosion powder coat
  • Clear glass lens
  • High intensity LED light source array
  • Fully sealed “Fit and Forget” design
  • Voltage spike protected to +500VDC
  • Over voltage protected to +200VDC
  • Reverse polarity protected to -500VDC
  • Power consumption of only 7W
  • 200G shock impulse resistant
  • -40ºC to +50ºC temperature range
  • CE compliant
MegaBeam LED# Order Code
Wire LeadsHM1539LED
DT PigtailHM1539LDD

Order this light today!

Place an order on: +44(0) 7768 517 012 or
+44(0) 1535 602 946 quoting the correct # Order Code or send us an email with your questions.

Order this light today!

Place an order on:
+44(0) 7768 517 012 or
+44(0) 1535 602 946
quoting the correct # Order Code or send us an email with your questions.