DuraLED® M Combi

DuraLed® M Combi are ‘Fit and Forget’ stop/tail/indicator combination signal lamps, utilising the latest LED technology, and engineered specifically for ultra heavy-duty applications on mining equipment and service vehicles.

Brand: Hella
Type: LED
Use: Signal Lamp

Swipe for more image views

DuraLed® M Combi lamps are extremely robust, fully sealed truly “fit and forget” products, tolerant to severe vibration levels and very compact in design. A high impact and shock resistant clear XYLEX® lens is permanently bonded to a rugged, UV damage-resistant composite base for increased mechanical strength and maximum durability. HELLA engineered DuraLed® M Combi lamps to ensure a very long service life and no lighting loss due to internal dirt build-up; they are also very well suited to wet and corrosive environments and tolerate short-term immersion. (See technical section for more XYLEX® information.)

Product Features:

  • Impact resistant smooth Xylex lens
  • Clear precision micro optics
  • Multivolt™ 8-28V DC Low power < 10W Fully sealed ‘fit and forget’ design
  • 0.5kg mass
  • 200G shock impulse resistant
  • Overheat, reverse polarity and short circuit protection
  • Double insulated supply cable with DT plug or tinned wire
  • Tested over a –40ºC to +70ºC temperature range
  • High efficiency, long life LED light
  • IP6K7K
  • UL94 flame retardant rated external parts
  • ADR, ECE and SABS compliant
  • Spares interchangeable with HELLA DuraLED range
  • CE compliant

Unlike normal signal lamps, DuraLed® products are maintenance free and extremely power efficient, which greatly reduces both operating temperature and demand on the vehicle’s electrical system. Maximum service life and light output of the high intensity LEDs is ensured by using internal heat sinks. The integral Multivolt™ control module also protects the DuraLed® M against damage from overheating, reversed polarity and short circuits. (See technical section for more Multivolt™ information.)

Swipe for more image views

DuraLed® M Combi lamps are extremely robust, fully sealed truly “fit and forget” products, tolerant to severe vibration levels and very compact in design. A high impact and shock resistant clear XYLEX® lens is permanently bonded to a rugged, UV damage-resistant composite base for increased mechanical strength and maximum durability. HELLA engineered DuraLed® M Combi lamps to ensure a very long service life and no lighting loss due to internal dirt build-up; they are also very well suited to wet and corrosive environments and tolerate short-term immersion. (See technical section for more XYLEX® information.)

Unlike normal signal lamps, DuraLed® products are maintenance free and extremely power efficient, which greatly reduces both operating temperature and demand on the vehicle’s electrical system. Maximum service life and light output of the high intensity LEDs is ensured by using internal heat sinks. The integral Multivolt™ control module also protects the DuraLed® M against damage from overheating, reversed polarity and short circuits. (See technical section for more Multivolt™ information.)

Product Features:

  • Impact resistant smooth Xylex lens
  • Clear precision micro optics
  • Multivolt™ 8-28V DC Low power < 10W Fully sealed ‘fit and forget’ design
  • 0.5kg mass
  • 200G shock impulse resistant
  • Overheat, reverse polarity and short circuit protection
  • Double insulated supply cable with DT plug or tinned wire
  • Tested over a –40ºC to +70ºC temperature range
  • High efficiency, long life LED light
  • IP6K7K
  • UL94 flame retardant rated external parts
  • ADR, ECE and SABS compliant
  • Spares interchangeable with HELLA DuraLED range
  • CE compliant
DuraLED® M Combi# Order Code
Signal Lamp Bare WireHM2379
Signal Lamp DT PlugHM2379D

Order this light today!

Place an order on: +44(0) 7768 517 012 or
+44(0) 1535 602 946 quoting the correct # Order Code or send us an email with your questions.

Order this light today!

Place an order on:
+44(0) 7768 517 012 or
+44(0) 1535 602 946
quoting the correct # Order Code or send us an email with your questions.