CorroLUME® NL

Weatherproof highly specialised twin lamp for Zone 1 hazardous areas, offers a high resistance to corrosion and attack from a wide spectrum of aggressive elements commonly found in mining, industrial and chemical plants.

Brand: Hella
Type: Fluorescent
Use: Fixed Hazardous

Each CorroLUME® NL luminaire comprises a single-piece moulded body in self-extinguishing glass-fibre-reinforced polyester material, with a scrim added to improve strength. Flame retardancy is to UL 94V0. Captive external body inserts with blind M8 thread enable various mounting options.

Swipe for more image views

Internally the inserts carry the control gear rail, and the reflector mounting support columns. The diffuser lens is formed in clear, UV stabilised, impact resistant self extinguishing polycarbonate. CorroLUME® lenses are designed with a smooth outer surface for easy cleaning with pressurised air or water. The lens is fastened againstthe body using a heavy welded stainless steel frame, with special captive, stainless steel socket head machine screws. The lens and frame hinges to one side when opened for safe and easy service access.

A specially designed Ex d rated electronic ballast is mounted on a robust electroplated control gear rail, fitted with an Ex e rated terminal block and special G13 single lead bi-pin lamp holders. The rail also incorporates an isolating switch, a safety factor in the event of accidental opening of the luminaire whilst still connected to the power circuit. A white epoxy powder coated steel cover, mounted on the gear rail by two captive thumbnuts, acts as a reflector.

Product Features:

  • Molded reinforced GRP body
  • Impact resistant polycarbonate lens
  • Galvanised steel gear tray
  • Painted steel reflector
  • Welded stainless steel frame with tamper resistant fasteners
  • Nylon lanyard
  • Silicone seal
  • Multiple fixing options available
  • Energy efficient electronic control gear
  • Fused terminal block M20 gland entry
  • IP6K6
  • IEC 60598-2-1 compliant
  • Ex ED Class IIc Zone 1&2 T4

HELLA CorroLUME® lights use a custom formulated neoprene gasket, bonded directly into the body to ensure a very long service life and high reliability.

The luminaire is provided with entries at each end, one of which is fitted with an Ex e rated compression gland suitable for 6 to 12mm diameter flexible cable and the other sealed off with a stopper.

The CorroLUME® NL is equipped with specially designed and approved components and fully encapsulated custom designed electronic control gear, in full compliance with the appropriate national hazardous area classification standards.

CorroLUME® NL lights must be installed and used in accordance with the national requirements imposed on equipment of this type of luminaire.

Optional eyebolts, pole clamps, brackets, and anti-vibration mountings are available.

CorroLUME® NL lights comply with IEC 60598-2-1, IEC 60079-0, IEC 60079-7, SABS 1031, AS 2380.6 and AS 2380.2

Swipe for more image views

Each CorroLUME® NL luminaire comprises a single-piece moulded body in self-extinguishing glass-fibre-reinforced polyester material, with a scrim added to improve strength. Flame retardancy is to UL 94V0. Captive external body inserts with blind M8 thread enable various mounting options.

Internally the inserts carry the control gear rail, and the reflector mounting support columns. The diffuser lens is formed in clear, UV stabilised, impact resistant self extinguishing polycarbonate. CorroLUME® lenses are designed with a smooth outer surface for easy cleaning with pressurised air or water. The lens is fastened againstthe body using a heavy welded stainless steel frame, with special captive, stainless steel socket head machine screws. The lens and frame hinges to one side when opened for safe and easy service access.

A specially designed Ex d rated electronic ballast is mounted on a robust electroplated control gear rail, fitted with an Ex e rated terminal block and special G13 single lead bi-pin lamp holders. The rail also incorporates an isolating switch, a safety factor in the event of accidental opening of the luminaire whilst still connected to the power circuit. A white epoxy powder coated steel cover, mounted on the gear rail by two captive thumbnuts, acts as a reflector.

HELLA CorroLUME® lights use a custom formulated neoprene gasket, bonded directly into the body to ensure a very long service life and high reliability.

The luminaire is provided with entries at each end, one of which is fitted with an Ex e rated compression gland suitable for 6 to 12mm diameter flexible cable and the other sealed off with a stopper.

The CorroLUME® NL is equipped with specially designed and approved components and fully encapsulated custom designed electronic control gear, in full compliance with the appropriate national hazardous area classification standards.

CorroLUME® NL lights must be installed and used in accordance with the national requirements imposed on equipment of this type of luminaire.

Optional eyebolts, pole clamps, brackets, and anti-vibration mountings are available.

CorroLUME® NL lights comply with IEC 60598-2-1, IEC 60079-0, IEC 60079-7, SABS 1031, AS 2380.6 and AS 2380.2

Product Features:

  • Molded reinforced GRP body
  • Impact resistant polycarbonate lens
  • Galvanised steel gear tray
  • Painted steel reflector
  • Welded stainless steel frame with tamper resistant fasteners
  • Nylon lanyard
  • Silicone seal
  • Multiple fixing options available
  • Energy efficient electronic control gear
  • Fused terminal block M20 gland entry
  • IP6K6
  • IEC 60598-2-1 compliant
  • Ex ED Class IIc Zone 1&2 T4
CorroLUME® NL# Order Code
NL 2x18W LampsHMN7218-240
NL 2x36W LampsHMN7236-240
NL 2x58W LampsHMN7258-240

Order this light today!

Place an order on: +44(0) 7768 517 012 or
+44(0) 1535 602 946 quoting the correct # Order Code or send us an email with your questions.

Order this light today!

Place an order on:
+44(0) 7768 517 012 or
+44(0) 1535 602 946
quoting the correct # Order Code or send us an email with your questions.