In the toughest environments

Make yourself visible with an LED Buggy Whip

Hello Tiger

We are the sole UK distributor
of Tiger Bay Buggy Whips Australia

Install a higher level of protection with Tiger Bay LED Buggy Whips

To meet safety regulations, mine sites often require light vehicles to display high visibility safety flags to improve visibility for drivers of heavy machinery. Mounting onto the bumper bars of light vehicles, these give vehicles an extra layer of protection.

Key Features:

  • High Quality LEDs
  • 12 Volts
  • Less than 1W Power Consumption
  • Integrated mounting bolt on base
  • Snap on/off quick-release shaft for easy installation.
  • Available as 1.2M, 1.8M or 2.4M lengths
  • Custom lengths available with a minimum order

During night and poor visibility levels, the operation of light vehicles generally requires the use of rotating safety beacons to improve visibility. However in mine sites where the topological surface contains large dips and hills, these may not be adequate. By combining a bright LED with a long reflective safety flag, drivers of light vehicles can ensure they are always in the line of sight of heavy machinery. The LED module puts negligible load on the vehicles electrical system (less than 1W), the shaft is constructed from a high quality fibreglass rod, sealing the electrical components from weather damage.

The flag mounts to the vehicle via a quick release latch allowing the flag to be taken down when the vehicle is off site. The cable is terminated with a DT plug, allowing quick removal whilst sealing the electrics from environmental damage. The flag contains reflective UV resistant material and the nylon material repels the high levels of dirt and dust often encountered in mine sites.

A typical kit consists of:

  • LED buggy whip
  • Triangle mag mount (X Mount available)
  • Aerial knock down rotates to 90º and 45º
  • Inline spring
  • 12/24 Volt power lead

Optional Extras & Accessories

Cross ‘X’ Mag Mount

Triangle Mag Mount

Aerial Knock Down

Inline Spring

12V/24V Power Lead

Reflective Flag

MAINLAND UK SHIPPING

We can ship from 1 to 4 LED Buggy Whips in one (1) delivery tube for £25.00. Orders placed for 5 or more LED Buggy Whips will be shipped in extra tubes at a cost of £10.00 each. Use the table to view our current shipping rates.

# OrderedDelivery MethodCost
1-4 Buggy WhipsShips in (1) tube£25.00
5-8 Buggy WhipsShips in (2) tubes£35.00
9-12 Buggy WhipsShips in (3) tubes£45.00
13+ Buggy WhipsPOAPOA

International Shipping

Deliveries outside of the UK mainland and International destinations are strictly POA. Please call for details.

Interested in this safety kit?

Let us call you back with no obligation!

Send us your contact details and we’ll call you back free! We’ll discuss the kit and any optional extras. You can also purchase the kit directly over the phone.

Check all the items you are interested in.

15 + 9 =

GDPR STATEMENT: Your information will only be used to make contact with you and will not be kept unless you give express permission to do so after our discovery call. We will never abuse your information, sell your information, or give your information to any third parties.

Install a higher level of protection with Tiger Bay LED Buggy Whips

To meet safety regulations, mine sites often require light vehicles to display high visibility safety flags to improve visibility for drivers of heavy machinery. Mounting onto the bumper bars of light vehicles, these give vehicles an extra layer of protection.

Key Features:

  • High Quality LEDs
  • 12 Volts
  • Less than 1W Power Consumption
  • Integrated mounting bolt on base
  • Snap on/off quick-release shaft
  • Available as 1.2M, 1.8M or 2.4M
  • Custom lengths with minimum order

During night and poor visibility levels, the operation of light vehicles generally requires the use of rotating safety beacons to improve visibility. However in mine sites where the topological surface contains large dips and hills, these may not be adequate. By combining a bright LED with a long reflective safety flag, drivers of light vehicles can ensure they are always in the line of sight of heavy machinery. The LED module puts negligible load on the vehicles electrical system (less than 1W), the shaft is constructed from a high quality fibreglass rod, sealing the electrical components from weather damage.

The flag mounts to the vehicle via a quick release latch allowing the flag to be taken down when the vehicle is off site. The cable is terminated with a DT plug, allowing quick removal whilst sealing the electrics from environmental damage. The flag contains reflective UV resistant material and the nylon material repels the high levels of dirt and dust often encountered in mine sites.

A typical kit consists of:

  • LED buggy whip
  • Triangle mag mount
  • Aerial knock down rotates 90º/45º
  • Inline spring
  • 12/24 Volt power lead

Optional Extras & Accessories

Swipe to cycle view

Cross ‘X’ Mag Mount

Triangle Mag Mount

Aerial Knock Down

Inline Spring

12V/24V Power Lead

Reflective Flag

MAINLAND UK SHIPPING

We can ship from 1 to 4 LED Buggy Whips in one (1) delivery tube for £25.00. Orders placed for 5 or more LED Buggy Whips will be shipped in extra tubes at a cost of £10.00 each. Use the table to view our current shipping rates.

International Shipping

Deliveries outside of the UK mainland and International destinations are strictly POA. Please call for details.

# OrderedDeliveryCost
1-4 Buggy WhipsShips in (1) tube£25.00
5-8 Buggy WhipsShips in (2) tubes£35.00
9-12 Buggy WhipsShips in (3) tubes£45.00
13+ Buggy WhipsPOAPOA

Interested in this safety kit?

Let us call you back with no obligation!

Send us your contact details and we’ll call you back free! We’ll discuss the kit and any optional extras. You can also purchase the kit directly over the phone.

Check all the items you are interested in.

7 + 10 =

GDPR STATEMENT: Your information will only be used to make contact with you and will not be kept unless you give express permission to do so after our discovery call. We will never abuse your information, sell your information, or give your information to any third parties.

For enquiries about our LED Buggy Whips, you can call the number below,

email us at the address below or use the handy and secure form to make an enquiry.

For enquiries about our LED Buggy Whips, you can call the number below, email us at the address below or use the handy and secure form to make an enquiry.

+44 (0) 7768 517 012

+44 (0) 1535 602 946

info@townybranfordltd.co.uk

Specialist Installers of Radar, Camera, Lighting and Safety Systems

511 Skipton Road, Keighley, West Yorkshire, BD20 6HR

Towny Branford Limited. Registered in England and Wales No.04408627