Power Beam 3000

Home / / / / Power Beam 3000

Power Beam 3000 LED Work Lamp – Multivolt™ 9-33V DC from Hella Lighting.

As an addition to the HELLA LED work lamp range, the Power Beam 3000 has been developed as a compact high-powered illuminating source. By combining 16 high-powered LEDs into a compact fully sealed die cast housing, the Power Beam 3000 achieves an outstanding 3100 Lumen output to provide close range illumination where physical constraints on mining machinery exist.

A rated operating temperature from -40 to +50°C, an expected lifespan of over 130 times that of a halogen bulb, plus excellent ingress protection means the Power Beam 3000 is suitable for the most unforgiving mining environments.
With a low power consumption of 43 Watts, the lamp places minimal strain on the vehicle’s electrical system, while the quality electronics provide Multivolt™ operation over a range of voltage levels from 9 to 33V DC.

The Power Beam 3000 also features reverse polarity protection, and overheating protection, which turns the light off when the integrated thermal sensor is triggered. The Power Beam 3000 comes pre-wired with a 150mm high temperature resistant pigtail loom with pre-connected 2 pin DT plug, allowing quick and easy installation. The low EMC signature (class 5) ensures the lamp does not interfere with any critical safety equipment such as radios.

The dimming function reduces light output to around 50% and can be controlled by the activation of a second active wire via a switch or other means. This allows the AS 5000LED® to operate on reduced power mode below 10.2V to prevent battery drain on mobile equipment when lights are on but the engine is not running.

Icon Legacy


Operating voltage: Multivolt™ 9-33 V DC
16 high power LEDs
Power consumption: 43W
Light output: 3100lm
Color temperature: 5700°K
Low EMC Signature (CISPR25 class 5)
Environment temp -40 to +50°C
Die cast aluminium housing
Bracket made of stainless steel
Ingress Protection IP6K7 and IP6K9K
Lifespan up to 130 times that of a halogen bulb
200G shock tested
Connection: Pigtail loom with high temp silicone cable and 2 pin DT
Reverse polarity protected
LED fail bridge
High-temperature protection

Power Beam 3000 LED Work Lamp
Close Range HMPB300WB
Long Range HMPB300NB
More information on this product
The advanced electronics of the LED work light ensure stable operation in a wide range of electrical supply conditions.The light is protected from reverse polarity input and short circuit faults. The AS 5000LED® is designed to operate at the extreme range of temperatures often encountered in underground and surface mining, from –40° to +50° Celsius. Integrated thermal protection ensures longevity of the electrical components at the most extreme temperatures.

An advanced non-stick surface coating prevents dirt build-up on the light and is resistant to acidic minerals and salts. The coating is bonded to the housing and will not peel or flake. The light can be high pressure cleaned.

A high impact resistant Grilamid® lens protects the light from damage, and is UV stable.
A color temperature of 5700°K mimics daylight and ensures a high color-rendering index, critical for performing work functions.
Multi-adjustable trunnion bracket ensures accurate and stable aiming in a high vibration environment in all assembly positions. Bracket locates the axis of rotation in the center of gravity.

The double insulated silicon sheath high temperature cable provides a high quality electrical interface with the supply system. A heavy-duty cable gland provides strain resistance for the cable under extreme vibration.
A specially designed driver board ensures advanced thermal management drawing the heat away from the LEDs. HELLA maintains its high standards in electrical certification with the AS 5000LED® work light, with approvals for CE, C-Tick Compliance, CISPR25 and ISO13766-2006 for earth moving machinery.

Get in touch with us about this product by using our contact formor search below for an alternative product.


[showbiz relatedworklamps]

Alternative Products