DuraLED® M High Intensity

Home / / / DuraLED® M High Intensity

DuraLED® M High Intensity Warning Beacon from Hella Lighting.

DuraLed® M MultiFlash are versatile high intensity LED optical warning beacon lights designed for heavy duty installation on mining equipment and service vehicles applications and where roof-mounted warning beacons may not be desirable or sufficient.
HELLA MultiFlash LED beacons offer multiple, user-selectable flash patterns to suit a large variety of applications. The desired operational mode can be selected by simply changing the settings via the power cable. No external control systems are required.

DuraLed® M beacons are extremely robust, fully sealed truly “fit and forget” products, tolerant to severe vibration levels and very compact in design. A high impact and shock resistant clear Xylex lens is permanently bonded to a rugged, UV damage-resistant composite base for increased mechanical strength and maximum durability. HELLA engineered DuraLed® M lamps to ensure a very long service life and no lighting loss due to internal dirt build-up; they are also very well suited to wet and corrosive environments and tolerate short term immersion. (See technical section for more Xylex® information.)

Unlike Xenon flash strobes, DuraLed® M LED beacons are maintenance free and extremely power efficient which greatly reduces both operating temperature and demand on the vehicle’s electrical system. Maximum service life and light output of the high intensity LEDs is ensured through using internal heat sinks. The integral Multivolt and MultiFlash control module also protects the DuraLed® M against damage from overheat, reverse polarity and short circuits. (See technical section for more Multivolt™ information.)

Safe and reliable electrical connection is facilitated via a highly flexible double insulated cable sealed into the base, terminated as a short length with a DT connector or 2m cable with tinned wire ends. Other connector options can be supplied as special orders.

DuraLed® M MultiFlash beacons are equipped with advanced clear micro optic lenses to prevent the hazardous occurrence of “ghost” signals by internally reflected light from other sources. Five LED signal colors are available (amber, red, blue, green and white) to suit all signal applications.

The smooth ergonomic design and very low profile (under 35mm) allows DuraLed® M units to be installed on almost any surface. Specially designed nylon bushes prevent stress fractures developing in the base, by distributing the fasting bolt load over a large surface of the base without transferring any torque. Tamper proof screw covers securely lock the product into place and simplify cleaning by eliminating dirt collecting cavities.

KEY FEATURES

Available in amber, red, blue, green and white
User selectable flash patterns
Impact resistant smooth Xylex® lens
Clear precision micro optics
Multivolt™ 9-33V DC
Low power < 10W Fully sealed “fit and forget” design 0.5kg mass 200G shock impulse resistant Overheat, reverse polarity and short circuit protection Double insulated supply cable with DT plug or bare wire Tested over a –40ºC to +70ºC temperature range High efficiency, long life LED light IP6K7K UL94 flame retardant rated external parts Spares interchangeable with HELLA DuraLed® range[/mk_icon_box][/vc_column_inner][/vc_row_inner][mk_toggle title="Click for more information" icon="theme-icon-next-big"]The advanced electronics of the LED work light ensure stable operation in a wide range of electrical supply conditions. The light is protected from reverse polarity input and short circuit faults. The AS 5000LED® is designed to operate at the extreme range of temperatures often encountered in underground and surface mining, from –40° to +50° Celsius. Integrated thermal protection ensures longevity of the electrical components at the most extreme temperatures. An advanced non-stick surface coating prevents dirt build-up on the light and is resistant to acidic minerals and salts. The coating is bonded to the housing and will not peel or flake. The light can be high pressure cleaned. A high impact resistant Grilamid® lens protects the light from damage, and is UV stable. A color temperature of 5700°K mimics daylight and ensures a high color-rendering index, critical for performing work functions. Multi-adjustable trunnion bracket ensures accurate and stable aiming in a high vibration environment in all assembly positions. Bracket locates the axis of rotation in the center of gravity. The double insulated silicon sheath high temperature cable provides a high quality electrical interface with the supply system. A heavy-duty cable gland provides strain resistance for the cable under extreme vibration. A specially designed driver board ensures advanced thermal management drawing the heat away from the LEDs. HELLA maintains its high standards in electrical certification with the AS 5000LED® work light, with approvals for CE, C-Tick Compliance, CISPR25 and ISO13766-2006 for earth moving machinery.[/mk_toggle][mk_padding_divider size="30"][mk_call_to_action style="custom" text_size="24" font_weight="normal" text="Get in touch with us about this product by using our contact formor search below for an alternative product." outline_skin="#fdc600" outline_hover_skin="#000000" button_text="CONTACT FORM" button_url="?page_id=14622" bg_color="#464646" text_color="#ffffff"][mk_padding_divider size="40"][mk_fancy_title style="alt" tag_name="h3" size="13" line_height="18" color="#696969" font_weight="bold" letter_spacing="0" font_family="none" margin_bottom="10" align="left" border_width="5"]ALTERNATIVE PRODUCTS[/mk_fancy_title][vc_column_text][showbiz relatedbeacons][/vc_column_text][/vc_column][/vc_row]

Alternative Products